Description

Due to the nature of porcelain tiles and production methods used, all sizing is nominal and a degree of variation in exact dimensions listed should be expected and can also vary across different batches of tiles. Whilst this is minimal, it can become more noticeable on larger format tiles so we would suggest using a wider grout joint to help disguise this.

As porcelain tiles are fired, they can bow or warp slightly. To avoid emphasizing this warpage, larger tiles should not be ‘brick-bonded’ and only staggered by a maximum of 20-30% of the length and/or using ‘Levelling Clips’ such as the RLS Vite system should be used to help minimise the tile lipping.

Installation

• Adhesive: For the best results, use a high-performance adhesive specially formulated for the dense composition of porcelain tiles.
• Grout: We provide a broad selection of Ardex tile grouts that are flexible, water-repellent, and available in a wide range of colours, perfect for matching or contrasting with your tiles.
• Sealing: While porcelain tiles themselves do not require sealing, applying a grout protector is recommended to help safeguard the grout lines.

Maintenance
Use a pH-neutral cleaner like Fila Cleaner to maintain your tiles. Avoid using harsh chemicals or abrasive tools that could damage the surface.

Please note: This is general guidance. For more complex installations, we recommend visiting our Advice & Support section or reaching out to our team for expert assistance.

To achieve the laying pattern as shown in the images, you will need 2 No. 226x40x10mm picket to 1 No. 185x185x10mm, which equates to the below split by area.

185x185x10mm – 67.29% of area
226x40x10mm picket – 32.71% of area

Wall paint used in images: Atelier Ellis Banyan Blue